4WD Accessories & Fitouts in Bendigo —
Done Properly, Once.
Bull bars, suspension, dual battery, snorkels, long-range tanks, drawer systems and full touring fitouts — fitted by one bloke, start to finish. Brand-agnostic across ARB, Ironman, TJM, Razlar, Safari, Airbag Man and Redarc. The same person quotes the job, sources the parts and hands the vehicle back.
- INDEPENDENT & BRAND-AGNOSTIC
- CERTIFICATE III AUTOMOTIVE
- 15+ YEARS INDUSTRY
- SERVICING BENDIGO & CENTRAL VICTORIA
MBC 4X4 Solutions is an independent 4WD workshop in Bendigo specialising in accessories and full touring fitouts. Run by Mitch Cox — Certificate III qualified mechanic, fifteen years in the industry, ten of them at ARB Bendigo. One bloke, one workshop, every build done properly.
Every 4WD Accessory On Your Touring Build — From One Bendigo Workshop
Whether it’s a single bull bar on a daily-driver Ranger or a ground-up touring fitout on a 79 Series, the
work goes through the same bench, by the same bloke. Here’s the scope.
Bull Bars & Frontal Protection
ADR-compliant bull bars, side rails and rock sliders. Brand choice across ARB, Ironman, TJM and Razlar depending on what the vehicle and the build actually call for.
- Bull bar fitting Bendigo — full ute and wagon range
- Side rails & rock sliders
- Recovery point upgrades
Suspension & Lift kits
4×4 suspension upgrades sized to the build and the load. Old Man Emu, BP51, Ironman, Dobinsons and Airbag Man — constant-load and progressive options quoted side by side.
- 4x4 suspension upgrade — full vehicle range
- Heavy-duty lift kits for touring loads
- BP51 & OME premium fitments
Dual Battery & 12V Electrical
Custom 12-volt electrical fitouts built around how you actually use the rig. Redarc DC-to-DC chargers, AGM and lithium dual battery systems, properly wired and fused.
- Dual battery system installation
- Redarc BCDC charger installation
- Lithium dual battery system upgrades
Snorkels & Induction
Safari snorkels and equivalent fitments — sealed properly so water and dust stay outside the airbox where they belong. Done by a mechanic, not a back yarder who’ll miss the critical plumbing in the engine bay.
- Snorkel installation 4WD — full vehicle range
- Safari and OEM-equivalent options
- Sealed airbox & ducting checks
Long-Range Fuel Tanks
Long-range fuel tank fitting for serious touring range. Brown Davis and equivalent fitments. Plumbed, vented and filled at request before the vehicle leaves the workshop.
- Long range fuel tank fitting
- Replacement & sub-tank options
- Using factory sender & pick up units
Drawer Systems & Roof Racks
Roof rack & drawer system fitouts for tradies and tourers alike — load space organised so the tools, fridge and recovery gear all live where they should.
- Roof rack & drawer system fitout
- Touring drawers, fridge slides & touring & tradie racks
- Roof racks & awning fitting
4WD Lighting Installation
Ultravision LED bars, driving lights and work lights — wired through properly fused circuits and clean dash switching. Lighting that impresses first time, every time.
- 4WD lighting installation — full range
- Ultravision driving lights
- Work lights & reverse lights
UHF Radios & Comms
GME UHF radio installation — convoy comms, antenna placement and aerial fitted correctly so you’re actually heard when you key the mic. Tradies, tourers and fleets.
- UHF radio installation 4WD
- GME radio fleet installation Bendigo
- Antenna fitment and location choices
Full Touring Fitouts
The full build, planned and fitted in the right order. Suspension first, then armour, then 12V, then comms, then drawers — so each layer doesn’t fight the next. 79 Series, 200 Series, Ranger, HiLux and more.
- 4WD touring fitout — full vehicle build
- 79 Series touring fitout
- 200 Series touring build
One Bloke. One Workshop. Brand-Agnostic Across The Board.
MBC isn't tied to a single supplier. That matters when you're spending $30,000 on a touring build and the bloke quoting it is paid the same either way. Mitch can quote multiple options at varying price points — entry, mid-range and premium — so you can pick what actually suits the build, not what suits the showroom.
And the same bloke who quotes the job sources the parts, fits them and hands the vehicle back. No service-counter handoff. No “the fitter who did your job left last month.” When something goes sideways 600 kilometres from anywhere three years later, you ring the same number.
- CERTIFICATE III AUTOMOTIVE
- 15 YEARS INDUSTRY EXPERIENCE
- BRAND-AGNOSTIC BUILD ADVICE
What a Bendigo 4WD independent can offer that a chain store can't
4 things that separate an independent specialist from a showroom-led accessories shop — and
why they matter on a serious 4WD build.
One Set of Hands
The bloke who quotes the build sources the parts, fits them and hands the vehicle back. Nothing is lost in translation between sales and the workshop floor.
Transparent Quoting
Three options at three price points on every build — entry, mid-range and premium. Plain-English scope. No surprise variations after the job starts.
Brand-Agnostic Advice
ARB, Ironman, TJM, Razlar, Safari, Airbag Man, Red Arc, Ultravision and GME on the bench. The brand that wins your job is the one that fits your build — full stop.
Long-Haul Aftercare
Standing behind the work three years later when something goes sideways 600 kilometres from anywhere. Ring the same number. Talk to the same bloke.
The 4WD Brands MBC Fits in Bendigo
Every brand here is on the bench. Mitch matches the brand to the build — not the other way round.
Approved supplier brands fitted by MBC 4X4 Solutions
From First Phone Call to Handover
Every build follows the same 5 steps. Straight scope, straight quote, straight handover.
1
You Tell Mitch What You're Building
Quick call or message. Vehicle, how you use it, where you’re heading, what you’ve already got fitted.
2
Three Options, Three Price Points
Entry, mid-range and premium — written out plainly so you can compare like for like and pick what suits.
3
Parts Sourced & Booked In
Parts ordered through MBC’s supplier accounts. Workshop slot booked. No surprise lead-time hits.
4
Built On The Bench
One bloke fitting it, photographed as it goes. Wiring fused, torques checked, leak-tested where needed.
5
Handover & Aftercare
Walk-around when you collect. The phone stays open for three years and beyond when something needs a look.
Recent 4WD Builds Off the MBC Bench
Real builds, real vehicles, real photography. Nothing on this page came out of a stock library.
ford super duty
Ford Super Duty Fitout — Kangaroo Flat Tradie Build
ARB Summit bull bar, Warn EVO 10 winch, Ultravision Nitro 140s and a GME UHF. First private Super Duty ARB bar fitout in Central Victoria.
- READ ARTICLE →
Next Gen Ranger Wildtrak
Ford Ranger Wildtrak Fitout — Sedgwick Family Tow Rig
ARB Summit MK2 bull bar, ARB Ascent canopy and Rhino Rack roof bars on Russell’s 2025 Wildtrak. MBC’s first ARB Ascent canopy fitment on a Next Gen Ranger — Sedgwick.
- READ ARTICLE →
200 Series LandCruiser
200 Series LandCruiser Touring Fitout - Geelong
Chris drove his 200 Series up from Geelong for the full touring fitout – bar, winch, snorkel, draws and roof rack. The build that started with a Warn winch services on his old 100 Series.
- READ ARTICLE →
Straight Talk, Straight Work, Straight Bills.
A few words from MBC customers across Bendigo and Central Victoria.
I couldn't rate Mitch highly enough!
His attention to detail with everything 4wd is second to none.
Highly recommending this business 10/10.
The attention to detail, workmanship, and overall knowledge really set MBC apart. He takes the time to do things properly and makes sure everything is done right the first time, which is hard to come by these days.
It's mint & I'm keen to test it out.
4WD Workshop Servicing Bendigo & Central Victoria
Private workshop in Bendigo, by appointment only. Customers travel in from across Central Victoria — and further, for specialist work.
Primary Service Area — Bendigo Metro
Bendigo · Eaglehawk · Epsom · Huntly · Jackass Flat · White Hills · Kennington · Strathdale · Strathfieldsaye · Flora Hill · Kangaroo Flat · Quarry Hill · Spring Gully · Golden Square · Maiden Gully · Marong
Central Victoria
Castlemaine · Heathcote · Daylesford · Kilmore · Echuca · Goornong · plus broader Central Victoria
National - Specialty Winch Work
Interstate customers travel in from Queensland and New South Wales for Gigglepin and Warn winch work. Phone Mitch to talk it through.
Questions Customers Ask Before Booking
Honest answers to the questions that come up on every quote call.
How much does a 4WD fitout cost in Bendigo?
It depends on what’s going on the bench. A bull bar and a basic accessory pack might land between $5,000 and $8,000 fitted. A full touring fitout — suspension, dual battery, snorkel, drawers, lighting and comms — typically lands between $15,000 and $45,000 depending on brand mix and build complexity. Mitch quotes three options at three price points so you can pick what actually suits the build.
Are you locked to one brand like ARB or TJM?
No. MBC is brand-agnostic. Mitch works across ARB, Ironman, TJM, Razlar, Safari, Airbag Man, Red Arc, Ultravision and GME — and quotes three options at three price points so you can pick what actually suits the build, not what suits the showroom.
Do you fit a bull bar in Bendigo if I buy it elsewhere?
In most cases yes — but it’s a conversation. Mitch will tell you straight whether the bar’s any good, whether it’ll mount up cleanly to your vehicle, and whether it’s worth fitting. No surprises later.
Will accessories void my new-vehicle warranty?
Not when they’re fitted properly. Mitch is a Certificate III qualified automotive mechanic and uses ADR-compliant, manufacturer-approved fitments. Logbook servicing can also be done on the same visit to keep the warranty stamp valid.
How long does a full 4WD fitout take?
A bull bar and a basic accessory job can usually be turned around in a couple of days on the bench. A full touring fitout — suspension, 12V, snorkel, drawers, comms, lighting — runs from one to three weeks depending on parts lead times and build complexity. Tell Mitch your trip dates and he’ll give you a straight answer either way.
Do you fit out 4WDs for tradies and business fleets?
Yes. MBC fits out single tradie utes and multi-vehicle business fleets — drawer systems, lighting, dual battery, UHF, bull bars and recovery gear. See the Fleet Services page for details.
Tell Me What You're Building.
Send through what you’ve got and how you use it. I’ll quote three options at three price points and tell you straight which one I’d fit if it was mine. Call, message or fill in the form — whichever suits.
Independent & brand-agnostic · Certificate III
Automotive · 15 years industry EXPERIENCE· Bendigo
& Central Victoria